The requirement for prototype parts that are fit for functional product testing in production intent materials is ever increasing. At RP Technologies, we’re also seeing an increase in secondary processes being bought in for effective testing and development.
Hot plate welding at prototype stage is one of the increasingly requested processes and we can provide this service in-house for prototype projects and low volume production.
What is hot plate welding?
Hot Plate Welding is a thermal welding technique capable of producing strong, air-tight welds in thermoplastic parts. When using thermal energy in a tightly controlled manner, thermoplastic parts can be heated to molten temperatures very quickly and then joined together.
Hot plate welding is used for a variety of applications but we typically see it being used on automotive expansion tanks, it’s the ideal process for tanks that need floats or sensors placing inside prior to welding for a hermetic seal.
The process is tailored to suit each project by manufacturing custom nests to accurately hold the components in position. The hot plate which contains cartridge heaters has mirrors bolted to each side of it which are profiled to suit the parts being welded.
To start the process the components are loaded into the nests, a hot point moves between the two parts before they move onto the hot plate. The melt time elapses and the parts move apart with the hot plate moving away. The two melted parts are then brought together and as they cool down the plastic welds together. Once cool the welded components are removed from the nests.
When designing parts that require hot plate welding there are a few points to consider.
It’s important that additional material is included in the component design to allow for sufficient melt to take place to achieve a suitable weld joint. As this varies for each component RP Technologies and Machine Techniques will look at each project individually and make a recommendation suited to your project.
If there are internal components fitted within the parts being welded the internal components will be subject to heat from the hot plate during the welding process. This means the internal components must be in a material that can resist this heat. RP will provide further information upon quotation of your project.
There’s a variety of joint designs that can be used depending on if aesthetics are important to your component design.
Straight Butt – this is the simplest but leaves the weld visible on both the inner and outer of the weld joint.
Flanged Butt – this has the weld internally on two legs meaning after the weld is completed it can’t be seen from either the inside or outside of the welded part.
Recessed – this creates an invisible weld from the outside of the product, ideal when aesthetics matter.
We will discuss joint design with you for each project to ensure the final welded part suits the application requirements.
The most suitable material for hot plate welding is polypropylene. Acetal and glass filled
nylon can also be welded using this process if the time between melt and joints coming together can be reduced to less than 2-3 seconds.
Leak and Strength Testing
Depending on the application that the welded components are needed for, leak or strength testing can be critical for part functionality. We can carry out leak and strength testing to ensure the final component meets customer requirements.
If you have a prototype or low volume production project that requires hot plate welding get in touch with RP Technologies today on 0121 550 5868 or chat to us online.
Just to confirm, we have received our recent order. The team and I were very keen to see what you had produced for us. It’s safe to say you have exceeded our expectations, so an enormous thank you from all of us! We look forward to seeing what you will be producing for us in the future.
Ted Varley, Covvi Ltd
In a project where time and quality were our first priority, we were excellently supplied by RP Technologies in all respects. Communication and execution of the project was first class and very professional.
Herr Wimmer, Knaus Tabbert GmbH
"I have had the pleasure of working with RP Technologies over the last 18 months and can only commend the team on their professionalism, technical expertise and ability to deliver a result against impossible timing"
Mark Smith, Programme Manager, Nifco UK Limited
Good morning Peter. I have been processing your PPAP submission. May I say this is one of the best presented PPAP’s I have received in over 160 in the last 18 months, well done.
, Global Automotive Wiring Harness Supplier
I've received the parts and they worked perfectly, thank you for your support with this and I appreciate the speedy turn around
JR, Kautex Unipart Limited
We are in agreement at how impressed we were with the quality, efficiency and professionalism of RP's service as a Rapid Prototype supplier
Chassis-Suspension Systems & Tuning, Jaguar Land Rover
In three weeks - three parts that fit together and perform, right first time. It has bolstered my confidence in bringing back otherwise 'China' jobs to the UK
SB, Zeta Specialist Lighting
Having such a great customer experience has only added to the excitement of the project. Thanks again and look forward to continuing this relationship
CD, XYZ Builds Ltd
Corona Plastics Ltd would highly recommend RP Tooling for any prototyping work and we will be returning for any future work that we require!
AL, Corona Plastics Ltd
Everybody is impressed with the quality of your work, in fact a few people thought they were the Die-Cast parts!
NM, Designer, A Paccar Company